SO1.0 Idler Gear

Master Off-Road MO2.0 is now available, which brings out stability through habit-free cornering while increasing the speed range!

Ackermann ratio is optimized by changing the tie rod mounting position. Achieves habit-free cornering.

Lighter front and rear bulkheads. Rigidity balance has also been reviewed to improve crash resistance.

Newly developed one-way slipper. Excessive traction to the front is released to gain turning ability and stability.

BD12 Belt tension adjustment cam (4 pieces)

RallyArt sticker sheet A4

BD12 Graphite Front Shock Tower

Yokomo Racing Factory Jacket (M)

PS-1 White Tamiya Colour Spray Paint for Polycarbonate.

These spray paints were especially developed for decorating transparent polycarbonate bodies used in R/C car modelling.

Team Orion Ranger NiMh 7.2V-5000Mah (Tamiya) 135x48x25mm 420g

Yokomo Off Road 13mm Shock Spring - DOT7 (6.5t) Front

These springs are compatible with the Φ13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns; the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of rear releases, so please choose according to the driving surface conditions. Each set contains 2 springs.

Yokomo Li-Po Battery Safety Bag

BD9 Kin Pin Collar (Long·2pcs)

Hitec HS75BB Retract servo

Calsonic sticker sheet A4

6X10X3 CERAMIC BEARING

Racing Performer Drift Wheel 5 spoke 01 6mm Offset Black 2pcs

Progressive R Shock Spring (2.30~3.00) 19.5mm

Yokomo BD12 Bearing Spring Cup (2pcs)

BD12 Graphite Rear Shock Tower

BD12 Drive cup for spool (steel)

Gold Banana 5mm  3pair (6)

HS-56HB Premium Karbonite Feather Servo

Jetko Block In Super Soft 1:8 Buggy Pre-glued on White Rims (2)

REPLACEMENT TIP PHILLIPS SCREWDRIVER 5.8X120MM

Yokomo Off Road 13mm Shock Spring - DOT6 (6.75t) Front

These springs are compatible with the Φ13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns; the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of rear releases, so please choose according to the driving surface conditions. Each set contains 2 springs.

Racing Performer Drift Wheel 6 spoke 02 8mm Offset White 2pcs

φ3.0xφ6.0x2.0mm aluminium shim (black) 8pcs

BD10 Separate Rear Suspension Mount (Front-Aluminium)

Yokomo MO2.0/1.0/YZ-4SF series Cooling Fan Mount (Upper)

Yokomo Off Road 13mm Shock Spring - DOT3 (11.5t) Rear

These springs are compatible with the Φ13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns; the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of rear releases, so please choose according to the driving surface conditions. Each set contains 2 springs.

TWEAK STATION IN ALU CARRY CASE

Hitec HS646WP Waterproof servo

Yokomo pit mat (100×60cm)

SANWA 94800 Sub Micro Digital Servo perfect for small foam and balsa electric models.

BD12/11 Graphite Bumper Support (2.4mm)

RIDE HEIGHT 17-30MM OFF ROAD 1/8 1/10

Yokomo M2×4mm Button Head Screw

HobbyWing Justock ESC & 13.5 Motor Combo set for regulated stock competition racing as well as other 1/10 Road and Off Road cars.