XRAY 970121 O-Ring 12.1x1.6 (10) Rubber O-ring fits over 12mm shaft. 1.6mm thick. Set of 10 pieces.

38T 64DP ALU PINION

Yokomo Front Hex 12mm Wheel (White) for MO-2.0

XRAY 901302 Hex Screw SB M3x2.5 (10) M3x2.5 setscrew, hex drive. Set of 10.

Xtreme Twister Speciale - ETS TC Body 190MM

Yokomo 99T Precision Spur Gear (64Pitch)

0.78 5/64"X120MM ALLEN WRENCH

Yokomo SO/MO Suspension Arm Pin Bush 3.5mm

BD10 Separate Rear Suspension Mount (Front-Aluminium)

Hudy Personal Racing Display

Jetko Dirt Slinger Super Soft 1:8 Buggy Pre-glued on White Rims (2)

PS-2 Red Tamiya Colour Spray Paint for Polycarbonate.

These spray paints were especially developed for decorating transparent polycarbonate bodies used in R/C car modelling.

BMW DTM clear body shell.

Wheel Base : 258mm

Width : 190mm

Rear wing and metal wing mount included.

BMW DTM Decal Sheet & Window Mask included.

Hitec HS7940TH HiVolt servo

XRAY 971035 Silicone O-Ring 3.5x2 (10) Silicone O-ring fits over 3.5mm shaft. 2mm thick. Set of 10 pieces.

1/10 ON-ROAD ULTRA-FINE DROOP GAUGE (4.0-6.6MM)

Master Drift MD1.0 Red Version - Limited Release

A limited colour version of the drift car "MD 1.0", which is advanced and innovative, and brings together Yokomo's best performance. A high-end machine that incorporates functions and structures for drifting. From the drive system to the suspension, it is the content that embodies the desires of drift experts.

TOURING ADAPTOR W/LOCKNUT

Tamiya Curved Scissors for lexan.

Master Off-Road MO2.0 is now available, which brings out stability through habit-free cornering while increasing the speed range!

Ackermann ratio is optimized by changing the tie rod mounting position. Achieves habit-free cornering.

Lighter front and rear bulkheads. Rigidity balance has also been reviewed to improve crash resistance.

Newly developed one-way slipper. Excessive traction to the front is released to gain turning ability and stability.

Yokomo Racing Factory Jacket (S)

Yokomo Super Off-Road SO 2.0 2WD Offroad Car Kit

The 2WD off-road car with fun and nimble driving has evolved even further! The new racing chassis has even more rear traction and stability, making it more fun to take corners.

The 13mm big bore shocks, with 10% more capacity than before, are the key to driving. The shocks provide both high stability and response, and produce a smooth arc in turns. Front and rear wings with increased downforce and a low-profile body control aerodynamics, contributing to stability at high speeds and attitude control when jumping. The new steering block makes it easy to adjust to regulations, making this a super off-roader that is truly for the enjoyment of racing.

YOKOMO FACTORY RACING T-SHIRT (M)

Yokomo Racing Pit Bag v5

Yokomo Super Drift SD 1.0 Assembly Kit

Customizing a car is one of the great pleasures of radio-controlled cars. Especially for drift cars, in addition to setting and tuning parts, there are many dress-up parts available, and depending on the combination, it is possible to create "the world's only original machine". Of course, the SD1.0 can also be used for a wide range of driving performance, and it is attractive for its wide range of adjustability to any road conditions and any driving style.

Yokomo Master Speed BDFWD Competition FWD Touring Car

The FWD touring car with stable and enjoyable handling has evolved to the latest specifications, equipped with graphite suspension arms, which are the mainstream today, and a thoroughly lowered center of gravity!

Master Drift MD1.0 Red Version - Limited Release

A limited colour version of the drift car "MD 1.0", which is advanced and innovative, and brings together Yokomo's best performance. A high-end machine that incorporates functions and structures for drifting. From the drive system to the suspension, it is the content that embodies the desires of drift experts.

Yokomo Racing Factory Jacket (M)

YOKOMO FACTORY RACING T-SHIRT (L)

Yokomo Racing Factory Jacket (L)

YOKOMO FACTORY RACING T-SHIRT (XL)

Yokomo Master Speed BD12 Carbon Chassis Competition Touring

Spare Parts Here

Honda Civic EK9 clear body shell.

Wheel Base : 258mm

Width : 190mm

Rear wing included.

Light bucket included.

Decal Sheet & Window Mask included.

VW Caddy clear body shell.

Wheel Base : 258mm

Width : 190mm

Front and Rear Bumper included.

Light Bucket included.

Caddy RedBull Decal Sheet & Window Mask included.

 Crazy sticker sheet A4x2

Skyline 2000 GT-R clear body shell.

Wheel Base : 258mm

Width : 190mm

Decal Sheet & Window Mask included.

Tamiya Body Clips

Coca-Cola sticker sheet A4

Land Rover sticker sheet A4

BMW E30 Warsteiner clear body shell.

Wheel Base : 258mm

Width : 190mm

Light bucket included.

3D printed Rear wing and Front bumper included.

BMW E30 Warsteiner Decal Sheet & Window Mask included.

BMW DTM clear body shell.

Wheel Base : 258mm

Width : 190mm

Rear wing and metal wing mount included.

BMW DTM Decal Sheet & Window Mask included.

Koswork Straight Lexan Body Scissors

TOYOTA JZX90 MARK II (Clear Body Set) for Dripake Mini [Yokomo DF-90BS]

Calsonic sticker sheet A4

 Crazy sticker sheet A4

RallyArt sticker sheet A4

Audi A5 DTM clear body shell.

Wheel Base : 258mm

Width : 190mm

Rear wing included.

Light bucket included.

3D printed wing mount and side mirrors included.

Audi A5 DTM Redbull Decal Sheet & Window Mask included.

Team SAMURAI Project FC3S Body with Light decal [Yokomo SD-TSFCB]

Toyota AE86 Trueno clear body shell.

Wheel Base : 258mm

Width : 190mm

Rear wing included.

Light bucket included.

Toyota AE86 Trueno Decal Sheet & Window Mask included.

TAMIYA Masking Tape 6mm w/dispenser

JConcepts S2 Lightweight Body (with Masking)

Porsche 911 RSR clear body shell.

Wheel Base : 258mm

Width : 200mm

Rear wing and 3D printed wing mount included.

Light bucket incl.

Porsche 911 RSR Comfort Energy Decal Sheet & Window Mask included.

HS-85BB Premium Micro Servo

Hitec HS430BH HiVolt servo

Hitec HS646WP Waterproof servo

HS-5087MH HV Premium Digital Metal Gear Micro Servo

Hitec HS635HB HiTorque servo

The HS-635HB utilizes the revolutionary “Karbonite™” gear train.  Karbonite™ is four times stronger than our standard nylon gears and even after hundreds of thousands of cycles it does not show any signs of wear.

Sanwa servo ERS-951

HS-8315BH High Voltage, Ultra-Fast Helicopter Tail Rotor Servo

HS-77BB Low Profile Servo

HS-56HB Premium Karbonite Feather Servo

Sanwa servo ERS971

Hitec HS7940TH HiVolt servo

Sanwa servo SX131

HS-7235MH High Voltage, High Speed, Metal Gear, Coreless Mini Servo

Hitec HS75BB Retract servo

HS-65HB Mighty Karbonite Feather Servo

Hitec HS645MG HiTorque servo

Hitec HS8775MG Low profile servo

HS-6635HB High Torque, Karbonite Gear Digital Sport Servo

Hitec HS5685MH HiVolt servo

HS-7245MH High Voltage, High Torque, Metal Gear, Coreless Mini Servo

1/8 DROOP GUAGE SUPPORT BLOCK 20mm

TWEAK STATION IN ALU CARRY CASE

1/10 ON-ROAD CHASSIS SUPPORT BLOCKS

Yokomo pit mat (100×60cm)

3/32" 0.093X120MM PT ALLEN WRENCH

TAMIYA Masking Tape 6mm w/dispenser

LARGE PHILLIPS SCREWDRIVER 5.8mm

Yokomo Racing Factory Jacket (S)

X-Acto X3201 Hobby Knife No11

TAMIYA Masking Tape 10mm w/dispenser

1/10 ON-ROAD ULTRA-FINE DROOP GAUGE (4.0-6.6MM)

X-Acto X211 Hobby Knife Blade pack of 5, #11, 1.88 in L, Carbon Steel 

REPLACEMENT TIP PHILLIPS SCREWDRIVER 5.8X120MM

GLOW WRENCH / CLUTCH NUT