BD12/11 Graphite RTC Axle Block Spacer (2.4mm)

BD12/11 Graphite Separate Battery Holder

BD12/11 Graphite Front Shock Tower Stiffener (2.4mm)

BD12/11 Graphite Bumper Support (2.4mm)

FOAM TYRE INSERT - HARD - SLIM 2WD (PR)

Fusion Slim - Front Tyres - Yellow - Low profile

Yokomo SO1.0/2.0 Aluminium Rear Upper Arm Mount (Wide)

SO1.0/2.0 Aluminium Front Upper Arm Mount (Standard)

SO1.0/2.0 Front Lower Steel Suspension Mount

SO1.0/2.0 Front Lower Aluminium Suspension Mount

Yokomo SO1.0/2.0 Aluminium L/R Bell Crank

Yokomo SO/MO2.0 13mm Shock Piston ⌀1.8×2×2.0mm (2pcs)

Yokomo SO/MO2.0 13mm Shock Piston ⌀1.7×2×2.0mm (2pcs)

Yokomo SO/MO2.0 13mm Shock Piston ⌀1.6×2×2.0mm (2pcs)

SO2.0 Offroad body

Yokomo Off Road 13mm Shock Spring - DOT3 (11.5t) Rear

These springs are compatible with the Φ13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns; the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of rear releases, so please choose according to the driving surface conditions. Each set contains 2 springs.

Yokomo Off Road 13mm Shock Spring - DOT5 (10.5t) Rear

These springs are compatible with the Φ13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns; the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of rear releases, so please choose according to the driving surface conditions. Each set contains 2 springs.

Yokomo Off Road 13mm Shock Spring - DOT4 (7.25t) Front

These springs are compatible with the Φ13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns; the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of rear releases, so please choose according to the driving surface conditions. Each set contains 2 springs.

Yokomo Off Road 13mm Shock Spring - DOT6 (6.75t) Front

These springs are compatible with the Φ13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns; the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of rear releases, so please choose according to the driving surface conditions. Each set contains 2 springs.

Yokomo Off Road 13mm Shock Spring - DOT7 (6.5t) Front

These springs are compatible with the Φ13mm high-capacity shocks adopted from the SO2.0 off-road car. The hardness of the spring is laser-engraved according to the number of turns; the higher the number of DOT, the harder the spring. There are 5 types of front releases and 4 types of rear releases, so please choose according to the driving surface conditions. Each set contains 2 springs.

Yokomo Aluminium Frame 30mm Cooling Fan (Silver)

Yokomo Aluminium Frame 30mm Cooling Fan (Red)

HOBBYWING XERUN COMBO XR10 PRO G2S ESC

The XeRun XR10 Pro G2 ESC has a lots of new advanced features and a 32-bit high-performance processor making this the must have ESC!

Reliable hardware combined with intelligent software (containing 10 common select-to-use profiles) creates an ideal power solution for 1/10th scale top touring car, pan car and buggy racing.

Master Off-Road MO2.0 is now available, which brings out stability through habit-free cornering while increasing the speed range!

Ackermann ratio is optimized by changing the tie rod mounting position. Achieves habit-free cornering.

Lighter front and rear bulkheads. Rigidity balance has also been reviewed to improve crash resistance.

Newly developed one-way slipper. Excessive traction to the front is released to gain turning ability and stability.

Yokomo Gokuraku Offroad Wing

Yokomo BD12 Graphite Rear Stiffener Plate

Front double joint universal shaft for BD12

MOMENTUM TWEAK WHEELS 1/10 TOURING

Accurately check if your 1/10 touring car has any form of tweak with this set of bearing supported weighted setup wheels! Place your car on a flat surface and have the weights spun on their side. Slowly lift your chassis and if a side rotates first, means that corresponding side is tweaked. Adjust your spring preload accordingly.

Flysky FGr4S AFHDS3 Receiver 4CH

The FGr4S receiver is the ideal support when using a Flysky remote control. The receiver makes use of a technology used by several Flysky transmitters - the automatic frequency hopping digital system (short: AFHDS3). With a bidirectional transmission system via the antenna, this receiver is specially designed for the installation and output of PWM/PPM/i-BUS and S.BUS signals. All AFHDS3-capable transmitters are supported.

Noble NB4-Pro Transmitter 2x Receivers

The Noble Pro breaks traditional standards with new ideas and offers extensive setting options for racers, crawlers and other RC vehicles. This 18CH transmitter with 7 channel modes is ideal for any terrain and shows top performance even in the most difficult situations. In addition, the new 2CH "Extreme Mode" with a new frequency algorithm ensures unimagined performance with only little delay.

SkyRC Bluetooth Corner Weight System

In order to optimally coordinate a car that can be driven in a balanced way in all situations, a computer-controlled weighing system is essential. SKYRC's Bluetooth Corner Weight System can help achieve just that.

The system measures the weight on each individual axis on the model. Thus, it pretty much reflects the existing weight distribution of the racing car on each wheel and makes it possible to optimize and adapt it with small changes. This gives you a decisive advantage the next time You hit the road.

"SkyRC Tire Sander Black"

Thanks to the SkyRC RTS001 tire sander in black, the seam in the middle of a new tire gets removed easily and quickly. Briefly pulled up and turned on, the seam can be removed in a very short time with a piece of sandpaper.

Yokomo Battery Weight (30g) 137x45x0.6mm

Racing Performer Ultra Diff Oil #7500

Aluminium Top Shaft SO1.0/2.0